HMK® S39
Stone Sealer - High Gloss

APPLICATION:
A modified acrylic base sealer which produces a tough, hard, and highly protective finish. HMK® S39 protects against water, dirt, and oil infiltration. For interior use only on rough and textured mineral and some ceramic surfaces. S39 enhances the stone's color and texture, leaving a high gloss finish. S39 is highly vapor permeable, UV resistant, and slip retardant. Not effective on polished, glazed, non-absorbing surfaces, or wet areas.

DIRECTIONS:
Apply to chemically clean and dry surface with a roller, a natural bristle brush or the HMK® Z170-171 Sealing Brushes. One or two thin and even applications are usually sufficient, depending on porosity of the stone or desired color enhancement. Allow 30-90 minutes between each application; do not allow to puddle. Allow 6-12 hours to dry before walking on and 24-48 hours to cure. Do not store at temperatures above 85F or below 50F.

COVERAGE:
50-80 sqft., 4.5-7 square meters per 1 liter (34 oz.) container.

WARNING:
Chemical product. Contains Petroleum Product, n.o.s. Flammable. Use with adequate ventilation. Avoid eye and skin contact. If exposed, wash/flush with water. Keep out of reach of children. See Material Safety Data Sheet.

PACKAGING:
1/4 liter cans (8.5 oz.) 25 per case, 1 liter cans (34 oz.) 12 per case, 5 liter cans (5.68 qts.) 4 per case, 10 liter cans (11.36 qts.) 2 per case.

STORAGE:
Store in cool place. Keep lid tightly closed. Do not store at temperatures above 85F or below 50F.

TESTING:
Perform testing on a sample tile and actual installation to determine number of coats necessary to protect particular stone, visual appearance of tile after S39 application and stain protection against water, dirt, and oil infiltration.

DISCLAIMER:
Limitation of liability: The liability of HMK® for defective products and any claims for damages whatsoever is limited to the purchase price of the products. HMK® shall not be liable for any consequential damages. No other warranty or representation is made or implied.