HMK® R59
Ceramic Tile Cleaner
APPLICATION:
A mild, fast-acting, dilute acid type cleaner for all new and existing
interior and exterior ceramic tile, and sanitary installations.
HMK® R59 is a multi-purpose product; it thoroughly removes
dirt, urine, calcium deposits, rust, and cement/grout film
residue from surface and grout joints. Not for use on some
glazed/polished surfaces, since the acid might harm the polish.
Do not use on polished marble or limestone. If an acid base
product is not an option, use the neutral HMK® R55 Intensive
Cleaner/Grout Film remover instead.
DIRECTIONS:
For initial cleaning, apply full strength, or for periodic thorough
cleaning use diluted 1:1 up to 1:15 with water, depending on
dirt and acid resistance of tile/grout joints. Thoroughly wet
area to be cleaned. Let R59 soak in shortly, then scrub with
white/tan polyester pad, and rinse with clean water. A second
application may be needed for stubborn areas. Use HMK® R60
Mildew Remover for the removal of algae, fungus, and mildew.
COVERAGE:
125 sqft., 11 square meters at full strength, up to 1800 sqft.,
165 square meters per 1 liter (34 oz.) container diluted.
WARNING:
Chemical product. Contains Inhibited Phosphoric Acid. Corrosive.
Avoid eye/skin contact. If exposed, wash/flush with water.
Keep out of reach of children. See Material Safety Data Sheet.
PACKAGING:
1/2 liter cans (17 oz.) 20 per case, 1 liter cans (34 oz.) 12 per
case, 5 liter cans (5.68 qts.) 4 per case.
STORAGE:
Store in cool place. Keep lid tightly closed.
TESTING:
Always test procedure first in an inconspicuous area to determine
dilution rate, performance, and acting time.
DISCLAIMER:
Limitation of liability: The liability of HMK® for defective products
and any claims for damages whatsoever is limited to the purchase
price of the products. HMK® shall not be liable for any consequential
damages. No other warranty or representation is made or implied.
|