HMK® R52
Poultice/Stain Remover
Silicone Caulking, Oil and Wax Stains

APPLICATION:
For use on all new and existing interior and exterior natural and cast stone, agglomerate, terrazzo, ceramic/Porcelain tile and cement surfaces, regardless of surface finish. Comes in paste form; ready to apply. Very effective in removing wax, oil and silicone stains left behind from grouting/sealants.

DIRECTIONS:
Apply paste with a stiff brush. Work paste into the surface. Several coats will be needed to achieve a minimum of 1/8" thick build-up on the surface. Let stand 12-24 hours, or until dry. Once paste looks powdery (dry) brush off residue; do not scrape off for this could scratch the surface. Allow remaining paste to completely dry before brushing off. Very deep/stubborn stains may require a second or third application. When stains are removed, clean area thoroughly with a mixture of R55 and water at a 1:10 dilution. Do not use R52 at temperatures below freezing or above 84F.

NOTE: In case of discoloration along silicone joints, be sure to cut them out, proceed as described above and replace with new silicone joints.

COVERAGE:
Approximately 4-7 sqft., 0.5-2 square meters per application 1/8 inch thick, 1 liter (34 oz.) container.

WARNING:
Chemical product. Contains Solvent Combination with Solid Matter. Keep out of reach of children. See Material Safety Data Sheets.

PACKAGING:
1 liter cans (34 oz.) 12 per case.

STORAGE:
Store in cool place.

TESTING:
Always test procedure first in an inconspicuous area to determine performance, and acting time.

DISCLAIMER:
Limitation of liability: The liability of HMK® for defective products and any claims for damages whatsoever is limited to the purchase price of the products. HMK® shall not be liable for any consequential damages. No other warranty or representation is made or implied.