HMK® R99
Special Stripper

APPLICATION:
A potent stripper/thinner/stain remover for all smaller mineral surfaces, interior and exterior. HMK® R99 strips heavy wax coats, sealers, and other protective build-ups. Also suitable for removal (by hand) of latex/resin modified grouts. Ideal for removing paint, oil, grease, and tar. Recommended for spot removal of latex modified grouts.

DIRECTIONS:
Apply generously onto dry surface, do not mix with water. Allow to act for 2-3 minutes, but do not let dry (solvent evaporates quickly). Scrub with a natural brush by hand, or with a floor machine using non- abrasive, solvent resistant scrub or stripping pads. HMK® R99 should then be picked up with a mop, sponge, or wet-vac. Rinse floor with HMK® R55, since R99 is not water soluble. If needed repeat entire procedure.

IMPORTANT: Some coatings may not allow for chemical stripping, and may require the use of floor machines.

COVERAGE:
50-80 sqft., 4.5-7 square meters per 1 liter (34 oz.) container.

WARNING:
Chemical product. Contains Petroleum Product, n.o.s. Flammable. Avoid eye/skin contact. If exposed, wash/flush with water. Follow appropriate safety precautions when dealing with solvent base products at all times (gloves, masks, boots, etc.). Keep out of reach of children. See Material Safety Data Sheet.

PACKAGING:
1/4 liter cans (8.5 oz.) 25 per case, 1 liter cans (34 oz.) 12 per case, 5 liter cans (5.68 qts.) 4 per case.

STORAGE:
Store in cool place. Keep lid tightly closed. Do not store at temperatures below 20o F.

TESTING:
Always test procedure first in an inconspicuous area to determine number of applications needed, performance, and visual appearance.

DISCLAIMER:
Limitation of liability: The liability of HMK® for defective products and any claims for damages whatsoever is limited to the purchase price of the products. HMK® shall not be liable for any consequential damages. No other warranty or representation is made or implied.