HMK® R80
Stripper/Stain Remover

APPLICATION:
A professional liquid stripper/stain remover for all mineral, porcelain/Ceramic tile surfaces. For interior and exterior use. HMK® R80 strips heavy wax coats, most sealers, varnishes, and other protective build-ups. R80 prepares the surface for application of new finishes. Ideal for removing paint, oil, grease, tar, and other stains (can be used in a poultice). May not completely remove deeply penetrated stains.

DIRECTIONS:
Apply generously onto dry surface. Allow to act for 10-15 minutes, but do not let dry on the floor. For small areas, rub by hand or use white/tan polyester pad with a floor machine for larger areas. R80 should then be picked up with a mop, sponge, or wet-vac. Rinse floor with clean water. First rinse should be a flood rinse. Second rinse should be a neutralizing rinse using HMK® R55 Intensive Cleaner/Grout Film Remover.

Important: Some coatings may require several applications or may not allow for chemical stripping.

COVERAGE:
50-80 sqft., 4.5-7 square meters per 1 liter (34 oz.) container.

WARNING:
Chemical product. Contains Petroleum Product, n.o.s. Flammable. Avoid eye/skin contact. If exposed, wash/flush with water. Keep out of reach of children. Use with adequate ventilation. See Material Safety Data Sheet.

PACKAGING:
1/4 liter cans (8.5 oz.) 25 per case, 1 liter cans (34 oz.) 12 per case, 5 liter cans (5.68 qts.) 4 per case, 10 liter cans (11.36 qts.) 2 per case.

STORAGE:
Store in cool place. Keep lid tightly closed.

TESTING:
Always test procedure first in an inconspicuous area to determine dilution rate, performance, and visual appearance.

DISCLAIMER:
Limitation of liability: The liability of HMK® for defective products and any claims for damages whatsoever is limited to the purchase price of the products. HMK® shall not be liable for any consequential damages. No other warranty or representation is made or implied.